|
|
TOPCOATS FOR WOOD USAGE INSTRUCTIONS
DRY TIME
MIX: Mix WT and WTW Topcoats thoroughly before use. Mild settling may occur if unused for prolonged periods of time. Agitating and circulating systems may be used with these product.
REDUCE:
WT Topcoats: Do not Reduce, apply as is.
WTW Water base Topcoats: Slight reduction may be desired. If necessary, reduce as required with water.
APPLICATION: Apply by Spray.
DRY TIME
WT TOPCOATS: Become tacky to the touch within 5 - 10 minutes and may be handled within 30 minutes of application. Complete cure will be achieved after all solvents have evaporated from the coating film. Coating dry times may vary, however WT Topcoats normally dry within 1 hour of application at 77°F ., and within 30 minutes, when cured at 140°F .
WTW TOPCOATS: Become tacky to the touch within 15 minutes and may be handled within 30 minutes of application. Complete Cure will be achieved after all solvents and water have evaporated from the coating film. While your dry times may vary depending upon humidity conditions and temperature, WTW Topcoats typically dry within 90 minutes at 77°F ., and within 30 minutes, when cured at 140°F .
STORAGE
Store in tightly sealed containers, at ambient temperatures. Keep from freezing. Repeated freezing and thawing of this product may greatly affect viscosity and usability. Protect from moisture and foreign materials. Process ability of this product can be adversely affected by contamination.
SHELF LIFE
WT TOPCOATS: 12 months, provided materials are kept in sealed original containers under specified conditions. Storage beyond this period can produce higher viscosities.
WTW TOPCOATS: 6 months, provided materials are kept in sealed original containers under specified conditions. Storage beyond this period can produce higher viscosities and greatly affect product usability. |
BACK
NATIONAL PAINTS AND COATINGS ASSOCIATION MEMBER
|