|
|
VACUUM METALLIZING COATINGS - VTW-4532-1
VTW-4532-1 RAPID CURE HIGH TEMPERATURE VM TOPCOAT
|
DESCRIPTION
VTW-4532-1 Rapid Curing High Heat VM Topcoat has been designed for use on general purpose interior surface finishing applications.
Among its attributes, VTW-4532-1 delivers extremely low foaming properties and requires relatively short cure times at low temperatures. In addition, VTW-4532-1 exhibits very good specularity, plate adhesion and optical properties.
|
PROPERTIES |
VALUES |
NOTATIONS |
Specific Gravity:
Pound / Gallon:
Solids Content:
Viscosity:
Spread:
Boiling Range:
Flash Point:
V.O.C. Content: |
1.00 - 1.11
8.33 - 9.26
+ 50 %
38 - 44 sec.
1960 sq/ft
182 - 349
53
< 2.5 |
at 77 °F
at 77 °F
Range by weight
#3 Zahn Cup
at .50 mills (approx.)
°C - °F
°F (TCC)
lb / gl |
OTHER INFORMATION
DOT Classification: Flammable Liquid (FL)
HMIS Rating: 2-1-0 H-F-R
HMIS RATING KEY
H = Health
F = Fire
R = Reactivity
0 = Minimal Hazard
1 = Slight Hazard
2 = Moderate Hazard
3 = Serious Hazard
4 = Severe Hazard
APPLICATION
Method: Apply by Flow Coat, Dip, Conventional and HVLP Spray.
COATING PROPERTIES
For flow Coat and Dip: Reduce 1:2, or as much as 1:3 with water.
For Spray: Reduce 1:1, or as much as 1:2 with water.
CURE CYCLE
Flash off 5 minutes. Cure to a minimum part temperature of 285 degrees F., for 15 minutes.
STORAGE
Store in tightly sealed containers, at ambient temperatures. Protect from moisture, evaporation and foreign materials. Process ability of this product can be adversely affected by evaporation and contamination.
SHELF LIFE
6 months, provided materials are kept in sealed original containers under specified conditions. Storage beyond this period can produce higher viscosities.
AVAILABILITY
VTW-4532-1 is available in 5 and 55 gallon epoxy phenolic lined steel containers. Please contact Pearl Paints for ordering information. |
BACK
NATIONAL PAINTS AND COATINGS ASSOCIATION MEMBER
|