|
|
VACUUM METALLIZING COATINGS - VBW-4573-A
VBW-4573-A COSMETIC RESISTANT WATER BASE VM BASECOAT
|
DESCRIPTION
VBW-4573-A is a Water Base Vacuum Metallizing Basecoat that has been designed for use in Basecoat and Topcoat applications.
Among its attributes; VBW-4573-A adheres to ABS, Polycarbonate, surface treated Polypropylene, Polyethylene, Phenolic and Metals, and exhibits optimum brilliance, flow, Chemical resistance and optical properties.
VBW-4573-A has been specifically designed for low V.O.C. Cosmetic as well as general purpose Metallizing applications, requiring the ultimate in physical properties in a Water base VM coatings.
|
PROPERTIES |
VALUES |
NOTATIONS |
Specific Gravity:
Pound / Gallon:
Solids Content:
Viscosity:
Spread:
Boiling Range:
Flash Point:
V.O.C. Content: |
.97 - 1.07
8.08 - 8.91
42 - 51%
19 - 26 sec.
2860 sq/ft
214 - 349
61
< 2.0 |
at 77 °F
at 77 °F
Range by weight
#3 Zahn Cup
at .33 mills (approx.)
°F
°F (TCC)
lb / gl |
OTHER INFORMATION
DOT Classification: Flammable Liquid (FL)
HMIS Rating: 1-1-0 H-F-R
HMIS RATING KEY
H = Health
F = Fire
R = Reactivity
0 = Minimal Hazard
1 = Slight Hazard
2 = Moderate Hazard
3 = Serious Hazard
4 = Severe Hazard
APPLICATION
REDUCTION: Reduce 2:1 with water for Basecoat applications. Reduce 1:1 with Water for use as a Topcoat.
METHOD: Apply by conventional and HVLP Spray.
COATING PROPERTIES
WATER SOAK: No evidence of blistering, whitening of the coating surface or loss of adhesion after 24 hours emersion at 104 degrees F., and 5 minutes recovery.
CHEMICAL RESISTANCE: No evidence of blistering, cracking, whitening of the coating surface or loss of adhesion after 24 hours emersion in a various cosmetics, at ambient temperature.
HUMIDITY: No evidence of cracking of the coating surface, shrinkage or whitening of the coating surface after 24 hours at 104 degrees F., and 98% relative humidity.
CURE CYCLE
For Basecoat applications, flash off 15 minutes, followed by a 90 minute cure at a minimum part temperature of 185 degrees F., to as much as 295 degrees F., depending on substrate and film thickness at application. For use as a Topcoat, flash of 15 minutes, followed by a 90 minute cure at a minimum part temperature of 185 degrees F.
STORAGE
Store in tightly sealed containers, at ambient temperatures. Protect from moisture, evaporation and foreign materials. Process ability of this product can be adversely affected by evaporation and contamination.
SHELF LIFE
3 months, provided materials are kept in sealed original containers under specified conditions. Storage beyond this period can produce higher viscosities.
AVAILABILITY
VBW-4573-A is available in 5 and 55 gallon epoxy phenolic lined steel containers. Please contact Pearl Paints for ordering information.
|
BACK
NATIONAL PAINTS AND COATINGS ASSOCIATION MEMBER
|