VACUUM METALLIZING COATINGS - VT-4957

 

VT-4957 FAST AIR DRY HIGH SOLIDS VACUUM METALLIZING TOPCOAT
DESCRIPTION VT-4957 is a high solids, low cost Vacuum Metallizing Clear Topcoat that offers relatively short tack free set up times, exceptional gloss and superb flow. In addition, VT-4957 delivers outstanding appearance at thin film load levels and offers very good re-coat characteristics. VT-4957 is ideally suited for general purpose Vacuum Metallizing applications, where short lines or extended cure line times may be unavailable.
PROPERTIES	VALUES	NOTATIONS
Specific Gravity: Pound / Gallon: Solids Content: Viscosity: Spread: Boiling Range: Flash Point: V.O.C. Content:	.85 - .96 7.08 - 7.99 21 - 29 % 30 - 36 sec. 1380 sq/ft 133 - 340 - 7 < 5.25	at 77 °F at 77 °F Range by weight #2 Zahn Cup at .33 mills (approx.) °F °F (TCC) lb / gl
OTHER INFORMATION DOT Classification: Flammable Liquid (FL) HMIS Rating: 1-3-0 H-F-R HMIS RATING KEY H = Health F = Fire R = Reactivity 0 = Minimal Hazard 1 = Slight Hazard 2 = Moderate Hazard 3 = Serious Hazard 4 = Severe Hazard REDUCTION Do not reduce. Apply as is.. APPLICATION Method: Apply by conventional and HVLP Spray. CURE CYCLE Air dry (or) Flash off 15 minutes, followed by a 60 minute cure at 140 degrees F. STORAGE Store in tightly sealed containers, at ambient temperatures. Protect from moisture, evaporation and foreign materials. Process ability of this product can be adversely affected by evaporation and contamination. SHELF LIFE 12 months, provided materials are kept in sealed original containers under specified conditions. Storage beyond this period can produce higher viscosities. AVAILABILITY VT-4957 is available in 5 and 55 gallon epoxy phenolic lined steel containers. Please contact Pearl Paints for ordering information.

 BACK


NATIONAL PAINTS AND COATINGS ASSOCIATION MEMBER