VACUUM METALLIZING COATINGS - VT-4037

 

VT-4037 VACUUM METALLIZING TOPCOAT
DESCRIPTION VT-4037 is a fast curing High Solids Vacuum Metallizing Topcoat, designed for use in flow coatings and general purpose paint applications. Among its attributes, this Topcoat offers relatively fast cure at low temperatures, outstanding adhesion, exceptional appearances at thin film load levels and very good re-coat characteristics. In addition, VT-4037 is ideally suited for applications involving dip dyes, as it accepts stains and dye solutions readily and uniformly throughout the coating surface. The nature of this product, makes it ideally suited for most general purpose Vacuum Metallizing applications, where short lines or extended cure line times may be unavailable.
PROPERTIES	VALUES	NOTATIONS
Specific Gravity: Pound / Gallon: Solids Content: Viscosity: Spread: Boiling Range: Flash Point: V.O.C. Content:	.85 - .96 7.08 - 7.99 26 - 34 % 14 - 19 sec. 2880 sq/ft 180 - 313 53 < 5.50	at 77 °F at 77 °F Range by weight #2 Zahn Cup at .33 mills (approx.) °F °F (TCC) lb / gl
OTHER INFORMATION DOT Classification: Flammable Liquid (FL) HMIS Rating: 1-3-0 H-F-R HMIS RATING KEY H = Health F = Fire R = Reactivity 0 = Minimal Hazard 1 = Slight Hazard 2 = Moderate Hazard 3 = Serious Hazard 4 = Severe Hazard REDUCTION Reduce 1:1, 1:2, or 1:3 with VM&P Naptha, or TH-156 Thinner blend. APPLICATION Method: Apply by conventional and HVLP Spray, flow coat and dip. CURE CYCLE Flash off 15 minutes, followed by a 40 - 60 minute cure at 140 degrees F. STORAGE Store in tightly sealed containers, at ambient temperatures. Protect from moisture, evaporation and foreign materials. Process ability of this product can be adversely affected by evaporation and contamination. SHELF LIFE 12 months, provided materials are kept in sealed original containers under specified conditions. Storage beyond this period can produce higher viscosities. AVAILABILITY VT-4037 is available in 5 and 55 gallon epoxy phenolic lined steel containers. Please contact Pearl Paints for ordering information.

 BACK


NATIONAL PAINTS AND COATINGS ASSOCIATION MEMBER