Pearl Paints North America, Inc.

VT-149-3 COSMETIC RESISTANT VACUUM METALLIZING TOPCOAT
DESCRIPTION VT-149-3 Chemically Resistant Topcoat, has been specifically formulated for use in Cosmetics packaging and general purpose VM applications, requiring above average film properties and solvent resistance. Among its attributes, this Metallizing Topcoat offers very good flow, specularity, hardness, mar and chemical resistance properties, as well as very good levels of Humidity and water emersion resistance. VT-149-3 is suggested for use with any of our Vacuum Metallizing Basecoats. Its air drying to low-curing temperature requirements, makes this Metallizing Topcoat ideal for use on most lines.
PROPERTIES	VALUES	NOTATIONS
Specific Gravity: Pound / Gallon: Solids Content: Viscosity: Spread: Boiling Range: Flash Point: V.O.C. Content:	.85 - .91 7.08 - 7.58 11 - 16 % 16 - 21 sec. 340 sq/ft 133 - 291 4 < 4.50	at 77 °F at 77 °F Range by weight #2 Zahn Cup at .5 mills (approx.) °F °F (TCC) lb / gl
OTHER INFORMATION DOT Classification: Flammable Liquid (FL) HMIS Rating: 1-3-0 H-F-R HMIS RATING KEY H = Health F = Fire R = Reactivity 0 = Minimal Hazard 1 = Slight Hazard 2 = Moderate Hazard 3 = Serious Hazard 4 = Severe Hazard REDUCTION Do not reduce. Apply as is. APPLICATION Method: Apply by conventional and HVLP Spray.. CURE CYCLE Flash off 15 minutes, followed by a 60 minute cure at 150 degrees F. STORAGE Store in tightly sealed containers, at ambient temperatures. Protect from moisture, evaporation and foreign materials. Process ability of this product can be adversely affected by evaporation and contamination. SHELF LIFE 12 months, provided materials are kept in sealed original containers under specified conditions. Storage beyond this period can produce higher viscosities. AVAILABILITY VT-149-3 is available in 5 and 55 gallon epoxy phenolic lined steel containers. Please contact Pearl Paints for ordering information.

BACK

NATIONAL PAINTS AND COATINGS ASSOCIATION MEMBER