SP-960 DURA CURE LACQUERS

 

APPLICATION INFORMATION FOR: SP-960 DURA CURE COLOR COATINGS

USAGE MIX: Mix SP-960 color coatings thoroughly before use. Mild settling may occur if unused for prolonged periods of time. Agitating and circulating systems may be used in conjunction with SP-960 Color Coatings. REDUCTION: Do not reduce. Apply as is. APPLICATION METHOD: Apply by HVLP and Conventional Spray DRY TIME SP-960 DURA Cure Lacquers become tacky to the touch within 5 - 10 minutes and may be handled within 30 minutes of application. Complete cure will be achieved after all solvents have evaporated from the coating film. Coating dry times may vary, however DURA Cure Lacquers normally dry with 30 minutes of cure at 180 deg. F. PROPERTIES INITIAL ADHESION: 100% adhesion on ABS, Acrylic, Polycarbonate, PPO and Polystyrene Plastics. ADHESION AFTER 72 HOURS: 100% adhesion at the cross hatch. WATER EMERSION: No evidence of whitening of the coating or blistering of the coating surface after 24 hours water emersion and 5 minutes recovery. Testing performed at 104 degrees F. PENCIL HARDNESS: < 3H on Polycarbonate and Acrylic Plastics. STORAGE Store in tightly sealed containers, at ambient temperatures. Protect from moisture and foreign materials. Process ability of this product can be adversely affected by contamination. SHELL LIFE 12 months from the original date of manufacture.

 BACK


NATIONAL PAINTS AND COATINGS ASSOCIATION MEMBER